Operation Panel; Names And Functions Of The Operation Panel (Fr-Du04) - Mitsubishi Electric FR-F500 Instruction Manual

3.2 Operation Panel

With the operation panel (FR-DU04), you can set the running frequency, monitor the operation command
display, set parameters, display an error, and copy parameters.

3.2.1 Names and functions of the operation panel (FR-DU04)

Display
LED ×4 digits
[MODE] key
[SET] key
• Key indications
Key
[MODE] key You can select the operation mode or setting mode.
[SET] key You can determine the frequency and parameter setting.
• Used to increase or decrease the running frequency consecutively. Hold down this key to change the
[UP/DOWN] key
frequency.
( key)
• Press this key in the setting mode to change the parameter setting consecutively.
[FWD] key Used to give a forward rotation command.
[REV] key Used to give a reverse rotation command.
• Used to stop operation.
[STOP/RESET] key
• Used to reset the inverter when its output is stopped by the protective function activated (major fault).
• Unit indications, operating status indications
Indication
HZ Lit to indicate the frequency.
A Lit to indicate the current.
V Lit to indicate the voltage.
MON Lit in the monitor display mode.
PU Lit in the PU operation mode.
EXT Lit in the external operation mode.
FWD Flickers to indicate forward rotation.
REV Flickers to indicate reverse rotation.
FR-DU04
CONTROL PANEL
Hz
A
V
MON EXT PU
REV FWD
MODE REV FWD
STOP
SET
RESET
[UP/DOWN] Key
Description
Description
41
OPERATION
Unit indication
Hz (frequency)
A (current)
V (voltage)
Operation status indication
[Operation command] keys
[REV] (reverse rotation) key
[FWD] (forward rotation) key
[STOP/RESET] key
3