Table of Contents
Advertisement
VTrak M-Class Product Manual
Management Port
The Network Management–Ethernet tab enables you to see the current
Management Port settings on the Controller, including:
•
Controller ID
•
Maximum number of ports supported
•
Number of ports present
•
Number of failed ports
•
Port ID
•
Port status (enabled or disabled)
•
Link status (up or down)
•
IP type
•
DHCP status (enabled or disabled)
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Automatic Domain Name Service (DNS) through DHCP (yes or no)
•
Primary DNS server IP address
•
Primary MAC address
•
Maximum speed supported by this connection
To make changes to the Management Port settings:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click on the Network Management
4.
Click the Port 1 link in Management View.
5.
To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter the following:
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Enter a primary DNS server IP address.
6.
Click the Submit button.
iSCSI Data Ports
The Network Management–iSCSI tab enables you to see the current Data Port
settings on the Controller, including:
icon in Tree View.
icon.
icon.
82
Advertisement
Chapters
Table of Contents
