Promise Technology VTrack M-Class M200f Product Manual page 291

Event
Redundancy Check task
is queued
Redundancy Check task
is stopped internally
Resource
Resource is NOT
available
SEP (Storage Enclosure Processor)
SEP is not found
SEP is found
Spare Check
Spare check started on
the given spare drive
Spare check completed
successfully on the given
spare drive
Spare Drives
Physical disk assigned as
global spare
Physical disk is no longer
assigned as global spare
Global Spare has been
deleted
Physical disk assigned as
dedicated spare
Physical disk is no longer
assigned as dedicated
spare
Dedicated Spare has
been deleted
SMART
SMART error is received
Redundancy Check has been set manually or by
schedule.
The logical drive is offline. See page 286.
System resources are low. Reduce system load or
restart the VTrak. See page 218.
Verify that the SEP is properly installed. See
page 235 or page 236.
Normal.
Result of settings or user action. Normal.
Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
Result of settings or user action. Normal.
A disk drive reported a SMART error. If this message
appears repeatedly, replace the disk drive.
283
Chapter 8: Troubleshooting
Action