Promise Technology VTrack M-Class M200f Product Manual page 283

Event
Host-interface controller
has detected bus reset
Host-interface controller
has encountered an
unrecoverable error
Host-interface controller
has received an abort-
task/ abort task set/clear
task set command.
Host-interface controller
has received an clear
ACA command.
Host-interface controller
has received a LUN reset
command.
Host-interface controller is
informed that the initiator
detected an error.
Host-interface controller
has received illegal
secondary identification
Host-interface controller
has received a message
parity error
Host-interface controller
has received a bus reboot
Host-interface controller
has encountered an
unknown error
Host-interface controller
has encountered a
system error
Host-interface controller
has encountered a fatal
error
The initiator sent a reset command. If this message
appears repeatedly, contact Technical Support. See
page 299.
Restart the VTrak. See page 218.
Result of user action. Normal.
Result of clearing an auto contingent alliance
condition. If this message appears repeatedly,
contact Technical Support. See page 299.
Result of user action. Normal.
A FC/iSCSI error occurred. If this message appears
repeatedly, contact Technical Support. See
page 299.
A FC/iSCSI target received a second identify
message with a different LUN. If this message
appears repeatedly, contact Technical Support. See
page 299.
A FC/iSCSI message parity error. If this message
appears repeatedly, contact Technical Support. See
page 299.
The VTrak rebooted itself. If this message appears
repeatedly, contact Technical Support. See
page 299.
An unidentified error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
A VTrak system error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
Restart the VTrak. See page 218. If this message
appears repeatedly, contact Technical Support. See
page 299.
275
Chapter 8: Troubleshooting
Action