Delete A Logical Drive; Logical Drive Management - Promise Technology VTrack M-Class M200f Product Manual

Promise technology vtrak m-class product manual
Table of Contents

Advertisement

VTrak M-Class Product Manual
4.
Highlight the following parameters and press the backspace key to erase the
current value:
Alias - Type an alias into the field, if desired. Maximum of 32 characters.
Use letters, numbers, space between words and underscore.
Capacity - Maximum capacity shown. Enter a smaller capacity if
desired.
5.
Highlight the following parameters and press the spacebar to toggle though
the available choices:
Stripe size – Press the spacebar to select: 8, 16, 32, 64, 128, 256, 512
KB, or 1 MB
Sector size – Press the spacebar to select: 512 B; 1, 2, 4 KB
Write Policy – Press spacebar to select: Write Back or Write Through
Read Policy – Press spacebar to select: No Cache, Read Cache, or
Read Ahead Cache
6.
Press Ctrl-A to save your settings.

Delete a Logical Drive

1.
From the Main Menu, highlight Disk Array Management and press Enter.
2.
Highlight the disk array that contains the logical drive you want to delete and
press Enter.
3.
Highlight the logical drive you want to delete and press the spacebar to mark
it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight Delete Marked Logical Drives and press Enter.
5.
Press Y to confirm the deletion.

Logical Drive Management

This function deals with settings and functions of existing logical drives. To create
or delete a logical drive, see "Disk Array Management" on page 182.
If you did not use all of the available capacity of the disk array, you
can create an additional logical drive at this point.
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
Note
Caution
188

Advertisement

Table of Contents
loading

Table of Contents