Removing the operator information panel assembly
To remove the operator information panel assembly, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Remove the front cover (tower model only), bezel, and top cover (see
4. Detach the ferrite core on the light path diagnostics ribbon cable from the
128
IBM System x3800 Type 8866: Problem Determination and Service Guide
on page 113.
all external cables necessary to replace the device.
"Removing the top cover, bezel, and front cover" on page 117).
chassis.
Retention tab