Available Ip Commands - 3Com SuperStack II 3300 User Manual

60 C 8: S
HAPTER ETTING
Available IP
Commands
Table 15 IP Context Commands
Command
interface
route
arp
multicast
(continued)
IP P
ARAMETERS
Administering RIP
Using ping
Using traceRoute
See "Accessing the User Interface" on page 39 for information about
launching the user interface.
The following commands are available in the IP context:
Options
summary
define
modify
remove
statistics
display
static
remove
flush
display
static
remove
flush
age
dvmrp
igmp
interface
tunnel
routeDisplay
Sub-options Syntax
Display IP interface information
Define an IP address
Modify an IP address
Remove an existing IP address definition
Display IP interface statistics
Display the contents of the routing table
Define a static route
Remove a static route
Flush all learned routes
Display the contents of the ARP cache
Define a static ARP cache entry
Remove an ARP cache entry
Remove all entries form the ARP cache
Set the age time for dynamic ARP cache entries
Enable/disable DVMRP
Enable/disable IGMP features
Display multicast settings on each interface
display
Enable multicast routing on a given IP interface
enable
Disable multicast routing on a given IP
disable
interface
Display the configured multicast tunnels
display
Define a multicast tunnel
define
Remove a multicast tunnel
remove
Display the summary of the multicast routing
table