3Com SuperStack II 3300 User Manual page 108

108 C 8: S
HAPTER ETTING
Displaying
Virtual Links
IP P
ARAMETERS
When an ABR is connected to the backbone and provides access to
the other ABRs that do not have access to the network
When you define a virtual link, you specify the Transit Area ID and the
Target Router ID. The module also allocates default values for the
following characteristics associated with a virtual link. Table 28 lists these
characteristics and their default values.
Table 28 Virtual Link Characteristics
Characteristic
areaID
delay timer
hello timer
Rxmit Intvl
dead interval
password
You can change the default values of these characteristics with the
commands in this section.
To display information about the virtual links associated with the interface
you specify:
1 Enter one of the following commands at the top-level menu:
ip ospf virtualLinks summary
ip ospf virtualLinks detail
The following prompt is displayed:
Select virtual link (1-32|?) [1]:
2 Select the virtual link.
The following example shows a summary display:
Default Value
1 second
10 seconds
50 seconds
40 seconds
no password