Modifying an AreaID
Modifying the Target
Router
Modifying the
Transmit Delay
The following prompt is displayed:
Select virtual link (1-2|all):
2 Specify the virtual link(s) you want to remove.
To modify the area ID of the transit area associated with the virtual link:
1 Enter the following at the top-level menu:
ip ospf virtualLinks areaID
The following prompt is displayed:
Select virtual link (1-2|all):
2 Specify the virtual link required.
Enter target area [0.0.0.1]:
3 Specify the new area ID.
To modify the target router associated with the virtual link:
1 Enter the following at the top-level menu:
ip ospf virtualLinks router
The following prompt is displayed:
Select virtual link (1-2|all):
2 Specify the virtual link required.
Enter target router [16.6.6.6]:
3 Enter the IP address of the new target router.
You can set the virtual link transmit delay.
The default value for the transmit delay is 1 second.
To modify the transmit delay:
1 Enter the following at the top-level menu:
ip ospf virtualLinks delay
The following prompt is displayed:
Select virtual link (1-2|all):
Administering Virtual Links
111