3Com SuperStack II 3300 User Manual page 61

Table 15 IP Context Commands (continued)
Command
dns
udpHelper
icmpRouterDiscovery
ospf
(continued)
Options
cacheDisplay
display
domainName
define
modify
remove
nslookup
display
define
remove
hopCountLimit
threshold
areas
defaultRouteMetric
interface
Sub-options Syntax
Display multicast cache entries
Display the current domain name and the
name servers associated with it
Modify a currently defined domain name
Define a new name server IP address
Modify a name server IP address
Remove a name server IP address
Query a name server
Display UPD Helper information
Define port numbers and IP forwarding
addresses
Remove a port number or IP forwarding
address
Set the BOOTP hop count limit
Set the BOOTP relay threshold
Enable/disable ICMP Router Discovery
View areas and range definitions for each area
display
Define a new area
defineArea
Modify an existing area
modifyArea
Remove an area definition and its associated
removeArea
ranges
Add a range to an area
addRange
Modify a range in an area
modifyRange
Remove a range from an area
removeRange
Display the default route metric
display
Define the default route metric
define
Remove the default route metric
remove
Display a summary of the OSPF configuration
summary
on each IP interface
Display details of the OSPF configuration on
detail
each IP interface
Display the OSPF statistics for each specified IP
statistics
interface
Enable/disable OSPF on each of the specified
mode
interfaces
Specify the OSPF priority of each interface
priority
Assign an area to an interface
areaID
Specify an OSPF interface cost
cost
Available IP Commands 61