3Com SuperStack II 3300 User Manual page 34

34 C 3: I
HAPTER NSTALLING AND
IP Configuration
Default Values
S U L 3 M
ETTING P THE AYER
Table 8 Default SNMP Community Passwords
Access Level Password
read and write private
read-only public
The following default IP configuration values apply to each module.
Table 9 IP Default Values for Each Module
Parameter
arp
multicast
domain name service
udp helper
ICMP router discovery
OSPF
static routes
The following default values apply to each interface.
CAUTION: Do not change the values marked with a * in the following
table unless you are an experienced network operator and are aware of
the consequences.
ODULE
Default Value
arp entries age out after 15 minutes
DVMRP disabled
IGMP query enabled
No tunnels defined
Domain name undefined
No name servers defined
No udp helpers defined
Default hop count = 4
Default relay threshold = 0
Disabled
No areas defined (except the implicit definition of
the backbone, 0.0.0.0)
No neighbors defined
Router ID pre-defined based upon the system ID
of the Layer 3 Module
No virtual links defined
No static routes defined