3Com SuperStack II 3300 User Manual page 25

Using the Layer 3 Module in a Switch Stack
Figure 8 shows how to connect several switches using the Layer 3
Module and Matrix modules in a stack. There is only one Layer 3 Module
in the stack because only one Layer 3 Module is supported per stack.
Figure 8 Layer 3 Module Used with the SuperStack II Switch Matrix Module
Switch
stack
3Com does not support more than one Layer 3 Module per stack. Do not
install more than one Layer 3 Module in a stack.
Network Configuration Examples
Layer 3
module
Matrix
module
25