Troubleshooting - Technogym EXCITE Run 500 Service Maintenance Manual

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3

6. TROUBLESHOOTING

The troubleshooting procedures are illustrated by means of flow diagrams. To facilitate
interpretation of these diagrams, the following standard box shapes are used:
This type of box is the START point of the troubleshooting procedure. It
typically contains a description of the problem or malfunction.
This type of box represents a decision point in the troubleshooting procedure.
It typically contains a description of the CHECK to be made, with an outcome
that is either a positive (YES) or negative (NO) response.
This type of box is a step in the troubleshooting procedure where an ACTION
must be carried out. It typically contains a description of the ACTION
necessary to resolve the problem Therefore, after executing the specified
ACTION:
1. Check whether the problem has been resolved;
2. If the problem persists, it is recommended to resume the troubleshooting
A circled number (such as that shown on the left) next to a box of the
troubleshooting procedure indicates that more detailed instructions for
performing that particular check or action are provided below the flowchart.
A circled letter (such as that shown on the left) is used to mark a point in the
procedure. Typically, this indicator is used in page changes.
The connectors indicated in the following pages, refer to 700 model's LED Boards,
unless otherwise indicated.
procedure from the point before the action was carried out.
Page 6.1