W Eekly Maintenance Operations - Technogym EXCITE Run 500 Service Maintenance Manual

11.2. WEEKLY MAINTENANCE OPERATIONS
These operations can be carried out by the machine owner and do not require any
special skills.
The weekly machine maintenance operations consists of simple cleaning, lubrication and checking
the emergency stop to ensure the correct and safe functioning of the machine.
For the weekly maintenance operations, proceed as follows:
11.2.1. C
HECKING THE
1. With the machine turned on and moving at a speed of approximately 5 km/h (3 mph), trip the
emergency stop and check that the machine halts, displaying the "PRESS A KEY" message.
11.2.2. C
OMPLETE OPERATION
1. When the machine is switched on, check that it performs the power-on self test procedure
which:
• sounds the buzzer;
• resets the incline.
At the end of which the machine goes into standby, awaiting a keyboard command.
2. To check the correct operation of the machine:
• get on the machine;
• press the "Start" key to begin the exercise and check that the tread belt motor starts;
• press the "+" and "-" keys on the keyboard and check that the tread belt speed varies
accordingly;
↑
• press the "
" and "
• put on the heart rate meter and check that the machine correctly reads the heart rate value;
• grasp the sensors and check that the machine correctly reads the heart rate value.
Page 11.2
RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
"E
MERGENCY STOP
↓
" keys and check that the incline varies accordingly;
"