Important Information - Sirona Intego Service Manual

5 Important information
5.1 Storage location for system- and user-specific data
DTC data
Operating data
Service log
Device configurations
DTC settings
Dentist data
16
5

Important information

5.1
Storage location for system- and user-specific
data
The treatment center features a central unit memory, which is
permanently connected to the center. Consequently, data does not have
to be backed up and written back if the board is replaced.
Composition of DTC data
The DTC data is made up of the operating data, the service log, the
device configurations, the DTC settings, and the dentist data.
General definition
Recorded operational periods, operating states
of service/maintenance-related functions, and
registered maintenance and service operations
Service information from the "info", "warning",
"error" categories and user information (always
provided in conjunction with the time when it was
recorded)
It is always the most recently detected
configuration that is saved. This consists of all
the boards that can be detected by the SW
(together with serial numbers and detectable
options/versions, where applicable)
All the settings for functions that are
independent of the dentist
All the settings for functions that are dependent
on the dentist
IMPORTANT
The DUMC displays service information only.
Sirona Dental Systems GmbH
Service Manual INTEGO / INTEGO pro
Example
Sanitation, purge and auto-purge
logs; lifting and backrest motor duty
cycles; amalgam separator filling
level; Sprayvit vent
Module (DWE, DAB, etc.), serial
numbers (treatment center, boards)
MSBV opening time, IP address, etc.
Flushing time, tumbler filling time,
instrument setting, chair programs,
LED lamp, etc.
64 57 316 D3543
D3543.076.01.04.02 06.2015