Procedures Before Operation - Mitsubishi Electric MELSEC iQ-R Series User Manual

Procedures before operation

This section describes the procedures to configure the system of the safety communication relay function before operation.
Mounting procedures
1.
Installation of batteries
Install batteries to the SIL2 Process CPU of both systems. ( MELSEC iQ-R CPU Module User's Manual (Startup))
2.
Installation of an extended SRAM cassette or an SD memory card
Install an extended SRAM cassette or SD memory card to the SIL2 Process CPU of both systems as necessary. (
MELSEC iQ-R CPU Module User's Manual (Startup))
During access to the SD memory card, do not turn off the power, reset, or remove the SD memory card. ( MELSEC iQ-R
CPU Module User's Manual (Application))
3.
Mounting of the module
Mount each module on the base unit. ( MELSEC iQ-R Module Configuration Manual)
Wiring procedures
1.
Wiring
Connect each module and external devices.
Wiring location
Wiring for the power supply module
Wiring for the redundant function module
Wiring from the RJ71GF11-T2 to the remote head module
Wiring for the I/O module
Procedures for the remote head module
1.
Power-on of the system
Before turning on the power, check the following items.
• The power supply is connected properly.
• The power supply voltage meets the specifications.
• The remote head module is in the STOP state.
2.
Creation of a project
Start the engineering tool and create a project. ( MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's
Manual (Startup))
3.
Connection between a personal computer and the remote head module
Connect a personal computer with the engineering tool installed to the remote head module. ( MELSEC iQ-R CC-Link IE
Field Network Remote Head Module User's Manual (Startup))
4.
Initialization of the remote head module
Initialize the remote head module using the engineering tool. ( MELSEC iQ-R CC-Link IE Field Network Remote Head
Module User's Manual (Startup))
5.
Parameter setting of the remote head module
Set the system parameters, CPU parameters, and module parameters of each module. ( MELSEC iQ-R CC-Link IE Field
Network Remote Head Module User's Manual (Application))
• Setting of the system parameters and the CPU parameters
• Setting of the module parameters of each module
1 FUNCTIONS
68
1.9 Safety Communication Relay Function
Reference
 MELSEC iQ-R Module Configuration Manual
 MELSEC iQ-R CPU Module User's Manual (Application)
•  MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup)
•  MELSEC iQ-R CC-Link IE Field Network Remote Head Module User's
Manual (Startup)
 Manual for the I/O module used