Mitsubishi Electric MELSEC iQ-R Series User Manual page 100

■When a redundant system of redundant line is configured
When the remote head module is used in a redundant system of redundant line, the station number setting of the remote head
module from the master station is as follows:
■Control system
■Standby system
■Control system
■Standby system
4 TROUBLESHOOTING
98
4.4 Checking the Network Status
1.
Only the remote head module of either system is
displayed in the network map.
2.
Select the remote head module in the control system or
standby system to set the station number.
3.
The station numbers are set in the remote head
modules of both systems.