Led Unit Left Assy Assembly - Brother PR655 Service Manual

Main unit
15

LED unit left assy assembly

1. Set the LED base plate left 1, the LED light base 2 and the LED PCB
supply assy 3 to the LED upper cover 4, and then secure them with the 2
screws 1.
2. Connect the connector of the LED wire assy LED 5 to the LED PCB
supply assy 3.
3. Attach the LED lower cover left 6 to the LED upper cover 4 with the
screw 2.
1
2
Needle bar unit
Screw, Bind
0.59 — 0.78 N-m
M3X5
Taptite, Bind B
0.59 — 0.78 N-m
M3X10
3 - 60
1
Torque
Torque
4 5
1 2 3
2 6
4