Brother PR655 Service Manual page 43

Main unit
9
FFC and X-area sensor assembly removal
1. Remove the screw 1, and then remove the sheet.
2. Remove the 2 screws 2, and then remove the sheet.
3. Remove the screw 3, and then remove the X-area sensor assembly, X-
frame spacer and the insulation sheet.
4. Unlock the X-area sensor assembly's 2 connectors 1, and then disconnect
the 2 FFCs, (SML2CD-C) and (SML2CD-X), from the X-area sensor
assembly.
10
Y-frame spacer and X-belt presser removal
1. Remove the screw 1, and then remove the X-belt presser.
2. Remove the 4 screws 2, and then remove the 2 Y-frame spacers.
11
X-feed frame B removal
1. Remove the 4 screws (12, 2 each), and then remove the X-feed frame B
from the feed frame assembly.
Feed unit
2 - 22
1 2
3
1
2 2
1 1
2
1