Y-Frame Spacer And X-Belt Presser Attachment - Brother PR655 Service Manual

Main unit
11

Y-frame spacer and X-belt presser attachment

1. Attach the 2 Y-frame spacers 1 to X-carriage B with the 4 screws 1.
2. Align the X-belt presser 2 with the highest point of the T-belt, and then
attach the X-belt presser 2 to X-carriage B. Secure them with the screw
2.
1
2
12
FFC and X-area sensor assembly attachment
1. Connect the FFC (SML2CD-X) 1 to the X-area sensor assembly 2, and
lock the connector.
2. Connect the FFC (SML2CD-C) 3 to the X-area sensor assembly 2, and
lock the connector.
3. Attach the insulation sheet 4, X-frame spacer 5 and X-area sensor
assembly 2 to the feed frame assembly with the screw 1.
4. Hold the FFC (SML2CD-X) 1 with sheet B 6, and secure the FFC to the
feed frame assembly with the 2 screws 2.
5. Thread the FFC (SML2CD-C) 3 through the slot on the feed frame
assembly.
6. Hold the FFC (SML2CD-C) 3 with sheet C 7, and secure the FFC to the
feed frame assembly with the screw 3.
1
2
3
Feed unit
Taptite, Bind B
0.39 — 0.78 N-m
M3X10
Screw, Pan (S/P washer)
0.78 — 1.18 N-m
M4X8
Screw, Pan (S/P washer)
0.59 — 0.78 N-m
M3X10
Screw, Bind
0.59 — 0.78 N-m
M3X4
3 - 85
1
Torque
Torque
2
7 3
2
Torque
Torque
5
1
1
2
6
2 2
3 1 2 1
4