Card Cover Removal - Brother PR655 Service Manual

Main unit
8

Card cover removal

1. Release the 2 hooks 1, and then remove the card cover 2 from the panel
rear cover.
9
Pen holder removal
1. Remove the 2 screws 1, and then remove the 2 pen holders 1 from the
panel rear cover.
10
Back light drive PCB removal
1. Disconnect the connector 1 of the back light drive PCB 2 from the panel
PCB assy 3.
2. Unlock the lock of the connector, and then disconnect the back light FPC
4.
3. Remove the 2 screws 1, and then remove the PCB holder ASV relay 5
from the PCB base plate 6.
4. Disconnect the connector 7, and then remove the lead wire from the back
light drive PCB 2.
5. Remove the 2 screws 2, and then remove the back light drive PCB 2
from the PCB holder ASV relay 5.
Operation panel
2 - 81
1
2
1
1
1 3 1 1
4 5 2
2
5 2 7
6