T-Belt (Y-Drive) Attachment - Brother PR655 Service Manual

Main unit
Feed unit
5

T-belt (Y-drive) attachment

1 3 1 2
1. Hang the T-belt B60S796 3 over the Y driving gear pulley assembly 1
and the tension pulley plate final assembly 2, and then secure the tension
pulley plate final assembly to the feed frame assembly with the 2 screws
1.
*Key point
• Temporarily tighten the screws 1 first. Firmly tighten them
after completing 4 - 31 "X belt tension."
Torque
1
Screw, Pan (S/P washer)
Hand start
M4X8
3 - 79