Thread Take-Up Driving Lever Final Assembly Attachment - Brother PR655 Service Manual

Hide thumbs Also See for PR655:
Table of Contents

Advertisement

Main unit
8

Thread take-up driving lever final assembly attachment

1. Attach the thread take-up driving lever final assembly 1 to the arm bed
with the 2 screws 1.
*Key point
• Align the roller 2 with the groove 3 on the thread take-up
cam.
• Press the bottom of the thread take-up driving lever final
assembly against the arm bed, and then secure them with the
2 screws 1.
1
9
Presser foot vertical base final assembly
1. Attach the presser foot cushion base 2 to the presser foot vertical base 1
with the screw 1.
2. Thread the presser foot vertical bush 3 through the presser foot vertical
base assembly, and then tighten the screw 2.
3. Attach the presser foot vertical pin 4 to the presser foot vertical base
assembly, and tighten the screw 3.
*Key point
• Align the presser foot vertical pin with the end face 5 of the
presser foot vertical base.
1
2
3
Upper shaft unit
Screw, Bind
1.57 — 1.96 N-m
M5X12
Screw, Pan
0.78 — 1.18 N-m
M3X5
Screw, Truss
0.59 — 0.78 N-m
M2.6X3
Set Screw, Socket (CP)
1.37 — 1.57 N-m
M4X4
3 - 42
Torque
2
2
5
Torque
Torque
Torque
1
1
3
1
1
3
2
3
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr655c

Table of Contents