Feed Unit Assy. Attachment - Brother XR9000 Service Manual

Main unit
10

Feed unit assy. attachment

1. Fit the feed unit 1 to the rear cover assy. attachment position, and secure
them with the 2 screws 1.
2. Fit the lower shaft bushing 2 to the rear cover assy. attachment position,
set the lower shaft bearing presser 3, and secure them with the 2 screws
2.
*Key point
• Set the lower shaft bearing presser 3 so that the projecting
part of 3 is positioned at upper right.
3. Apply 1 or 2 drops of OILER to the matching section of the lower shaft 4
and the lower shaft bushing 2.
Apply OILER to the matching section of the lower shaft
and the lower shaft bushing.
1
2
11
Spring attachment
1. Attach the spring 1 to the positioning hole 2 of the lower shaft bearing
presser 3 and the notch part 4 of the base plate assy.
Main parts
Giza Tite
5X16
1.18 — 1.57 N
Giza Tite
5X16
1.18 — 1.57 N
1
1 - 2 drops
XZ0206***
Torque
·
m
Torque
·
m
4
1
2
2 3
1
3 2
4
1
3 - 9