Advertisement
Add the second extension and, ensuring
the tops of the tables are all level, re-
tighten the eight bolts.
Clip the saw guard to the riving knife and
tighten the bolt sufficiently to hold it the
set position while still allowing
adjustment.
Slide the hose support clip onto the rear
guide rail and lock it into place.
Fit the dust collection hose to the saw
guard and the spigot on the rear
extraction point. Secure in place with the
two hose clamps provided.
Clip the hose into the support arm to hold
it clear of the table.
It is strongly recommended you use a
dust extractor at all times, by
connecting a hose to the 100mm
outlet.
Failure to use an extractor will require
stopping the machine regularly to
clean out the internal parts of the
extraction hood, to avoid causing
damage and prolong the life of the
blade.
Advertisement
