Operating Buttons, Function Fi Elds - GRAUPNER MX-16S Programming Manual

Controlling the "Data Terminal"
Input buttons and function fi elds
ENTER, ESC, SELECT, +, -, CLEAR ... SEL, STO, CLR, SYM, ASY,
ENTER button
(confi rm)
ESC button (inter-
rupt / back)
SELECT button
Buttons to the left of the screen
• ENTER button, left-hand rocker button
Pressing ENTER takes you from Channel Select
(which appears when you switch the transmitter on)
to the basic display, and then on to the multi-function
menus. You can also call up a selected menu using
ENTER.
• ESC button, left-hand rocker button
Pressing the ESC button returns you step by step
within the function select system, taking you right
back to the basic display. If you make a change in the
meantime, the change is retained.
• SELECT
The SELECT button is used for several tasks:
1. A brief press switches from the basic transmitter
display to the »Servo display«; see page 27.
2. Hold the button pressed in to display the current
positions of the two INC / DEC buttons CTRL 5 +
6 in the basic display. The information is shown for
the duration of the button-press. See page 27.
3. Within the set-up menus press the SELECT but-
ton to activate the adjustment fi elds, and then
press SELECT again to return to the function
fi elds at the bottom edge of the screen.
4. If you hold the SELECT button pressed in, you
can "leaf through" the menu lines within the indi-
,
vidual set-up menus using the right-hand rocker
button – symbolised by above and below the
two buttons.
Buttons to the right of the screen
• "+" and "-" buttons, right-hand rocker button
1. "Leaf through" the menu lines within the individual
menus when the SELECT button is held pressed
in – symbolised by above and below the two
buttons.
2. "Leaf through" lists, e.g. the model select or multi-
function list – symbolised by
of the right-hand rocker button.
3. Change between the function fi elds, most of
which are located at the bottom edge of the
screen; see right-hand column – symbolised by
on both sides of the right-hand rocker but-
ton.
4. Select and adjust parameters in the adjustment
fi elds, after activating them by pressing the SE-
LECT button – symbolised by + and – above and
below the right-hand rocker button.
• CLEAR
Resets a changed parameter value in the active input
fi eld to the default value.
Function fi elds
Larger – up button
Function fi elds appear in the bottom line of the screen
(+)
in certain menus; they can be selected using the right-
hand rocker button –
Smaller – down
button (-)
CLEAR
(reset to standard
value)
S E L
Press the SELECT button to activate a function fi eld.
Function fi elds
• SEL select
• switch symbol fi eld
(assigning switches of all kinds)
• STO store
• CLR clear
• SYM adjust values symmetrically
on both sides
• ASY adjust values asymmetrically
• switch to second page (next menu) within a
menu
Description of transmitter – Operating buttons
.
S T O C L R S Y M A S Y
(e.g. transmitter control position)
reset to default value
19