Dedicated Micros TransVu Operation Manual page 78

Position (GPS)
This command is used to query the current position of the video server. The server will send an SMS
message to the destination number specified on the SMS configuration webpage or to the number specified
in the command. The SMS destination number will typically be an SMS server but by specifying a mobile
phone number the lat./long position in decimal degrees can be reported to any mobile phone capable of
receiving SMS messages
POSITION?<password>{&<phone>}
password
phone
S S M M S S R R e e p p o o r r t t s s
SMS reports are messages sent from the video server to a defined SMS server when an event occurs. The
events that cause SMS reports are selected on the SMS configuration webpage.
Startup
STARTUP?<name>&<time>&<IP address>&<latitude>&<longitude>&<zone>
Name
Time
IP address
Latitude
Longitude
Zone
Dedicated Micros © 2006
SMS password to enable commands to be executed
Optional mobile phone number to send the report to
The system name
The local julian time of the message
The Ethernet IP address, either programmed or DHCP address
Current latitude decimal degrees if known
Current longitude if known
Current zone
77