Dedicated Micros TransVu Operation Manual page 55

GPS tracking route
Default tracking
radius
SMS report on
zone change
Periodic offtrack
report period
Database event on
zone change
Trackpoint Interval
Trackpoint Period
Ignore Navigation
Warning
54
Routes are defined as a collection of zones, this must be selected to allow the SMS and
database events to be generated on zone changes.
The tracking route when selected defines a set of points which can be interpreted as a
straight line, the tracking radius determines the maximum radius between the points
where the route does not follow a straight line. If the TransVu goes beyond this radius an
event will be triggered.
Enable this option to send an SMS position message every time a new zone is entered on
the specified route.
OFFTRACK messages will be sent at specified intervals if the vehicle leaves the selected
route, enter the time period between the messages. An ONTRACK message will be sent
when the vehicle returns to the specified route.
Enable this option to create a database event entry every time a new zone is entered on
the selected route. Offtrack and On track events will be generated when the vehicle
leaves the route and returns to the route specified.
Enter the mileage intervals for a new trackpoint to be added to the local track data file.
Note: 0 disables the distance based updates.
Track data files are created every time the unit starts up, the filename consists of the
startup tim and the files are stored in date directories.
Enter the time in seconds for a new trackpoint to be added to the local track data file.
Note: 0 disables the time based updates.
Track data files are created every time the unit starts up, the filename consists of the
startup tim and the files are stored in date directories.
This setting allows the GPS system to be used in Simulation Mode for demonstration
purposes.
Note: This option is always cleared on the unit with a system startup.
Dedicated Micros © 2006