Configuration Options - Dedicated Micros TransVu Operation Manual

Configuration Options

The Configuration Option provides access to the on-board configuration web pages and allows the
Administrator to program the functionality that is supported on the TransVu.
When this option is selected you will be prompted for a user name and password, the default settings are
dm and web.
Note: It is recommended that the default username and password be changed once the configuration has
been completed, this will ensure no unauthorised personnel gain access to the configuration web
pages.
E E n n g g i i n n e e e e r r i i n n g g B B o o o o t t l l o o a a d d e e r r
If for any reason there are no webpages loaded on the TransVu or the unit has been re-powered more than
five time in one hour an Engineering Bootloader page will be displayed.
If this occurs telnet (or use HyperTerminal) to the unit and type "Reset" at the command prompt to reset the
unit. Contact Dedicated Micros Technical Support for assistance, contact details can be found on the cover
of this manual.
Note: The unit attempts to exit engineering mode every 15 minutes and resume normal operation.
Dedicated Micros © 2006 17