Dedicated Micros TransVu Operation Manual page 25

Schedule
The TransVu can be set up to automatically activate alarms and VMD at specific preprogrammed times.
Function
Schedule
SETTime
UNSETTime
Reset
Schedule Enable
Scheduled Record
Rates
Operation Mode
Title
24
Description
This is a seven day schedule that allows alarms and VMD to be enabled or disabled at
times during the day
This identifies when the unit will enable alarms and VMD.
This identifies when the unit will disable alarms and VMD.
The unit must be reset if the times are changed.
Enable the schedule function so the unit can switch between the set and unset mode
Enable Scheduled Record Rates to have the unit operate in different modes depending
on the time of day, e.g. day and night operation may have different record times for night
time operation. This must be enabled to ensure the schedule affects the recording
These titles help identify the mode of operation for each Mode
Dedicated Micros © 2006