Database Configuration - Dedicated Micros TransVu Operation Manual

Function
Protect Image
Partition Summary
Unprotect Images
Protect Images
Protect Images
Indefinitely

Database Configuration

The TransVu supports numerous logs which will store information on the actions and processes the unit
carries out. It is necessary to ensure the database can support and register all events.
The database configuration web pages gives information on the database of the unit and also allows the
maximum number of entries to be identified.
Function
Last database
reset time
Current number of
entries
Maximum number
of entries
38
Description
The recorded files will be displayed within the area. These are then selected to either
unprotect or protect.
Any images that have been previously protected and are selected in the protect image
partition summary section will be unprotected, these files will then be overwritten.
Any images that have not been protected or require the protect period extending can be
selected in the protect image partition summary and then the time the images are to be
protected can be identified in days.
If images are never to be overwritten the they can be protected indefinitely.
Description
This is a read only section and is generated by the TransVu, it identifies the last time that
the database was reset.
This is a read only section and is generate by the TransVu, it identifies the current number
of entries in the database.
This is the maximum number of events that will be logged in the database. When this
figure is reached the database will start overwriting the entries starting at entry 1.
Dedicated Micros © 2006