Dedicated Micros TransVu Operation Manual page 44

This allows you to view any of the enabled inputs on the TransVu, control the telemetry connected to the
system and set up any features that are required for your application; such as presets. You can also access
the camera menus from this page allowing you to configure parameters that are only programmable from the
camera menu.
Note: Review the relevant documentation for the camera to see how you navigate the camera menus.
Remember to save any configuration settings in the dome menu!
Important Information
It is possible to use VMD (Video Motion Detection) on moveable cameras, however to ensure that moving
the camera does not trigger false alarms the VMD will only be active when the dome is in preset position 1
(home position). This ensures that VMD is only active when the camera is viewing the field of view that the
VMD mask corresponds to, moving the camera away from preset 1 will automatically inhibit VMD detection
on the camera. As soon as the camera receives the command to 'return to home' the VMD will be
automatically re-enabled.
Note: It is necessary for the 'return to home' command to be issued so that the TransVu is aware the
camera is back at preset position 1, leaving the camera to return to preset 1 after a dwell time will not
be sufficient to re-enable the VMD functionality.
Dedicated Micros © 2006 43