Reset Menu (Reset) - Siemens SITRANS RD300 Operating Instructions Manual

SIT SITRANS RD300RANS RD300

Reset Menu (reset)

The Reset menu is used to reset the totals and maximum or minimum
reading (peak or valley) reached by the process; both may be reset at
the same time by selecting "reset high & low" ( rst HL ). If total is set
to no , the tare value used to zero the display may be reset by selecting
"reset tare" ( rst tr ).
Control Menu (Contrl)
The Control menu is used to control the 4-20 mA analog output and the
relays manually, ignoring the input. Each relay and analog output can
be programmed independently for manual control. Selecting automatic
control sets all relays and analog output for automatic operation.
Setting Up the Password (pass)
The Password menu is used for programming three levels of security to
prevent unauthorized changes to the programmed parameter settings,
and if Total option is enabled to program the non-resettable totalizer.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset
points
Pass 3: Restricts all programming, function keys, and digital inputs.
If Total is enabled:
Total: Prevents resetting the total manually
Gtotal: Prevents resetting the grand total manually
Page 58 SITRANS RD300 – OPERATING INSTRUCTIONS A5E31917845