Troubleshooting - Siemens SITRANS RD300 Operating Instructions Manual

SIT SITRANS RD300RANS RD300

TROUBLESHOOTING

Due to the many features and functions of this meter, it's possible that
the setup of the meter does not agree with what an operator expects to
see. If the meter is not working as expected, refer to the
recommendations below.
Diagnostics Menu (diag)
The Diagnostics menu is located in the Advanced Features menu, to
access Diagnostics menu see Advanced Features Menu , page 74.
This menu allows the user to test the functionality of all the meter LEDs,
check the meter's software and version information, and erase the
MeterView Pro software installation files from the meter. Press the Enter
button to view the settings and the Menu button to exit at any time.
For a description of the diagnostic messages, see
Advanced Features Menu & Display Messages, page 75.
Determining Software Version
To determine the software version of a meter:
1. Go to the Diagnostics menu ( diAG ) and press Enter button.
2. Press Up arrow button and scroll to Information menu
( Info ).
3. Press Enter to access the software number ( SFT ) and
version ( UER ) information. Write down the information as it is
displayed. Continue pressing Enter until all the information is
displayed.
4. The meter returns to Run Mode after displaying all the
settings.
Page 90 SITRANS RD300 – OPERATING INSTRUCTIONS A5E31917845