Setting The Rate/Total Input Signal (Input) - Siemens SITRANS RD300 Operating Instructions Manual

SITRANS RD300

Setting the Rate/Total Input Signal (Input)

Enter the Input menu to set up the meter to display current ( mA ) or
voltage ( volt ) inputs.
The current input is capable of accepting any signal from 0 to 20 mA.
Select current input to accept 0-20 mA or 4-20 mA signals.
The voltage input is capable of accepting any signal from -10 to +10 VDC.
Select voltage input to accept 0-5, 1-5, 0-10, or  10 VDC signals.
Setting the Totalizer Features (total)
To simply not display the total, select alternative display parameters in
the display ( dsplay ) menu.
Enable or disable the totalizer features by selecting " Yes " or " no " after
the input type has been set up. If the totalizer features are disabled, all
the totalizer features and functions are hidden from the menus. Level
and process meter features and functions are added to the menus.
Notes:
1. The totalizer continues working in the background.
2. When selecting "no" for Total, the meter functions as a
Process Meter. When selecting "yes" for Total, the meter
fuctions as a Rate/Totalizer.
Setting the Decimal Point (dEc pt)
The rate, total, and grand total decimal points are independent. See
Setting the Decimal Point ( dEc pt ) on page 30 for details.
A5E31917845 SITRANS RD300 – OPERATING INSTRUCTIONS Page 63