Siemens SITRANS RD300 Operating Instructions Manual page 5

SITRANS RD300
Protecting or Locking the Meter ------------------------------------------- 59
Total Reset Password & Non-Resettable Total ----------------------- 59
Making Changes to a Password Protected Meter -------------------- 60
Disabling Password Protection -------------------------------------------- 60
Main Menu (Rate/Total) ------------------------------------------------------- 61
Setting Up the Rate/Totalizer Meter (setup) --------------------------- 62
Setting the Rate/Total Input Signal (Input) ---------------------------- 63
Setting the Totalizer Features (total) ---------------------------------- 63
Setting the Decimal Point (dEc pt) ---------------------------------- 63
Programming the Rate/Totalizer (prog) -------------------------------- 64
Input Calibration Method (InCAL) ------------------------------------- 65
Scaling the Meter (SCALE) ---------------------------------------------- 66
Calibrating the Meter with External Source (Cal) ----------------- 67
Time Base, Total Conversion Factor & Total Reset -------------- 68
Setting the Display Parameter & Intensity (dsplay) ----------------- 69
Display Setup Menu (Rate/Total) ----------------------------------------- 70
Setting the Relay Operation for Rate/Total (relay) ----------------- 71
Relay Assignment (Assign) -------------------------------------------- 72
Setting the Relay Action ------------------------------------------------- 73
Programming Set and Reset Points ---------------------------------- 73
Setting Fail-Safe Operation --------------------------------------------- 73
Programming Time Delay ----------------------------------------------- 73
Relay Action for Loss of 4-20 mA Input (Loop Break) --------- 73
Relay and Alarm Operation Diagrams ------------------------------- 73
Relay Operation Details ------------------------------------------------- 73
Scaling the 4-20 mA Analog Output (Aout) ------------------------- 73
Reset Menu (reset) ------------------------------------------------------- 73
Control Menu (Contrl) ---------------------------------------------------- 73
Setting Up the Password (pass) --------------------------------------- 73
Advanced Features Menu ---------------------------------------------------- 74
Advanced Features Menu & Display Messages ---------------------- 75
Noise Filter (filter) -------------------------------------------------------- 77
Noise Filter Bypass (bypass) ---------------------------------------------- 77
Rounding Feature (round) ------------------------------------------------- 77
Modbus RTU Serial Communications (serial) ---------------------- 78
Select Menu (SElEct) ------------------------------------------------------- 79
Signal Input Conditioning (Functn) -------------------------------------- 79
Low-Flow Cutoff (CutofF) -------------------------------------------------- 82
Totalizer Count Up/Down (Count) ---------------------------------------- 82
Analog Output Programming (AoutPr) ---------------------------------- 82
Programmable Function Keys User Menu (user) -------------------- 84
Internal Source Calibration (ICAL) --------------------------------------- 85
iii