Setting The Display Parameter & Intensity (Dsplay) - Siemens SITRANS RD300 Operating Instructions Manual

SITRANS RD300
Setting the Display Parameter & Intensity (dsplay)
The upper display ( line 1 ) can be programmed to display:
4. Rate value
5. Total or grand total
6. Toggle rate/total
7. Toggle rate/G-total
8. Relay set points
9. Toggle rate and units
10. Toggle total and units
11. Toggle grand total and units
12. Max, min, or max & min values
13. Modbus input
The lower display ( line 2 ) can be programmed to display:
1. Engineering units or custom legends for the upper display
2. Rate value
3. Total or grand total
4. Toggle rate/total
5. Toggle rate/G-total
6. Relay set points
7. Toggle rate and units
8. Toggle total and units
9. Toggle grand total and units
10. Max, min, or max & min values
11. Modbus input
12. Off (no display)
Selecting engineering units or custom legends as the lower display
( d unit ) will display the unit or tag selected for the rate, total, or grand
total displayed in the Upper display.
For example, if the upper display is set to total , selecting d unit to
display on the lower display will have the total appear on the upper
display, and the total unit appear on the lower display.
A5E31917845 SITRANS RD300 – OPERATING INSTRUCTIONS Page 69