LINK Status Indicators
These green status indicators show the status of the individual Ethernet
connectors for the adapter that transmit or receive data on the network as
shown in the following tables.
Table 23 - LNK1 Status Indicator
Status
Cause
Off
The adapter is not properly connected
to the network.
Steady Green
The ENET1 network port has a 100
Mbps network link, but no activity.
Flashes Green
The ENET1 network port has a 100
Mbps network link with activity.
Steady Yellow
The ENET1 network port has a 10 Mbps
network link, but no activity.
Flashes Yellow
The ENET1 network port has a 10 Mbps
network link with activity.
Table 24 - LNK2 Status Indicator
Status
Cause
Off
The adapter is not properly connected
to the network.
Steady Green
The ENET2 network port has a 100
Mbps network link, but no activity.
Flashes Green
The ENET2 network port has a 100
Mbps network link with activity.
Steady Yellow
The ENET2 network port has a 10 Mbps
network link, but no activity.
Flashes Yellow
The ENET2 network port has a 10 Mbps
network link with activity.
Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017
Status Indicators
Corrective Actions
Securely connect the adapter to the network by using
an Ethernet cable. Also, make sure that the Ethernet
cable is correctly connected to the Ethernet connector.
No action required.
No action required.
No action required.
No action required.
Corrective Action
Securely connect the adapter to the network by using
an Ethernet cable. Also, make sure that the Ethernet
cable is correctly connected to the Ethernet connector.
No action required.
No action required.
No action required.
No action required.
Appendix A
123