Allen-Bradley PowerFlex 755T User Manual page 23

Configure the Interface
This chapter provides instructions and information for setting the parameters
to configure the built-in EtherNet/IP interface.
Topic
Configuration Tools
Setting the IP Address
Connecting the Interface to the Network
Apply Power
Start-up Status Indications
Configuring and Verifying Key Drive Parameters
Use Interface Parameters to Set the IP Address
Using the PowerFlex 20-HIM-A6 or 20-HIM-C6S to Access Parameters
Using a BOOTP or DHCP Server
Setting the Data Rate
Setting Communication Hierarchy
Setting a Controller Hierarchy
Setting a Fault Action
Changing the Fault Action
Setting the Fault Configuration Parameters
Resetting the Interface
Restore Interface Parameters to Default Configurations
Viewing the Interface Status Using Parameters
Updating the Interface Firmware
For a list of parameters, see
terms in this chapter, see the Glossary.
Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017
Appendix C, Parameter List. For definitions of
2
Chapter
Page
26
26
29
30
31
33
33
34
36
40
41
41
44
44
45
45
45
47
47
25