Allen-Bradley PowerFlex 755T User Manual page 115

Table 17 - Interface Diagnostic Items (continued)
Code Event
359 DHCP Rebind
360 DHCP Release
361 Net Sent Reset
362 Net I/O Open
363 Net I/O Idle
364 Net I/O Close
365 Net I/O Timeout
366 Net I/O Abort
367 PCCC I/O Open
368 PCCC I/O Close
369 PCCC I/O Timeout
370 Msg Ctrl Open
371 Msg Ctrl Close
372 Msg Ctrl Timeout
375 Net Ring Up
376 Net Ring Down
Rockwell Automation Publication 750COM-UM009A-EN-P - May 2017
Troubleshooting
Description
The interface rebinded its network address lease with
the DHCP Server.
The interface network address lease expired.
The interface received a reset command from the
network.
The I/O connection from the network to the interface has
been opened.
The interface received I/O connection 'idle' packets from
the network.
The I/O connection from the network to the interface
was closed.
The interface I/O connection has timed out.
The interface I/O connection was aborted because the
datalink configuration was changed.
The interface began receiving PCCC control messages
after the PCCC Control Timeout was set to a nonzero
value.
The device that sends PCCC control messages to the
interface (for example, the Control Bar feature in CCW)
has set the PCCC Control Timeout to zero.
The interface has not received a PCCC control message
before the PCCC Control Timeout.
The timeout attribute in the CIP-based network
Assembly Object was set to a nonzero value. This allows
control messages to be sent to the interface via the CIP-
based network Assembly Object.
The timeout attribute in the CIP-based network
Assembly Object was set to zero, disallowing control
messages to be sent to the interface via the CIP-based
network Assembly Object.
The interface has not received a control message via the
CIP-based network Assembly Object before the object
timeout attribute triggered.
The Device Level Ring (DLR) status is Normal.
The Device Level Ring (DLR) status is Faulted.
Chapter 6
117