Table of Contents
Advertisement
WARNING: When used in a Class I, Division 2, hazardous location, this
equipment must be mounted in a suitable enclosure with proper wiring method
that complies with the governing electrical codes.
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
WARNING: Do not wire more than two conductors on any single terminal.
WARNING: To comply with the CE Low Voltage Directive (LVD), this equipment
must be powered from a Safety Extra Low Voltage (SELV) or Protected Extra Low
Voltage (PELV) compliant source.
Interpret Status Indicators
Refer to the following diagram and table for information on how to interpret the
status indicators.
POINT I/O EtherNet/IP Adapter, Series C
POINT I/O EtherNet/IP Adapter
1734-AENT
0
0 2
Publication 1734-IN042F-EN-P - November 2018
Module status
Network activity
Network status
POINTBus status
System power
Field power
15
43264
Advertisement
Table of Contents
