PRODUCT SETUP
Do not set more than one protocol to the same TCP/UDP port number, as this results in unreliable operation of
those protocols.
5
5.3.5.14 TFTP protocol
SETTINGS PRODUCT SETUP COMMUNICATIONS TFTP PROTOCOL
TFTP PROTOCOL
The Trivial File Transfer Protocol (TFTP) can be used to transfer files from the B30 over a network. The B30 operates as a
TFTP server. TFTP client software is available from various sources, including Microsoft Windows NT. The dir.txt file obtained
from the B30 contains a list and description of all available files, for example event records and oscillography.
The "put" function is not for security reasons. You can enter a "get" command but not a "put" command.
TFTP MAIN UDP PORT NUMBER
restarted.
Do not set more than one protocol to the same TCP/UDP port number, as this results in unreliable operation of
those protocols.
5.3.5.15 IEC 60870-5-104 protocol
SETTINGS PRODUCT SETUP COMMUNICATIONS IEC 60870-5-104 PROTOCOL
IEC 60870-5-104
PROTOCOL
5-100
Figure 5-48: Example of UR web page showing event records
TFTP MAIN UDP PORT
NUMBER(69): 69
TFTP DATA UDP PORT 1
NUMBER: 0
TFTP DATA UDP PORT 2
NUMBER: 0
— To close the port, set the port number to 0. Any change takes effect when the B30 is
IEC TCP PORT
NUMBER: 2404
IEC NETWORK
CLIENT ADDRESSES
CHAPTER 5: SETTINGS
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
Range: 0 to 65535 in steps of 1
See below
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL