GE B30 Instruction Manual page 169
Bus differential system
Hide thumbs
Also See for B30:
- Instruction manual (626 pages) ,
- Communications manual (532 pages) ,
- Technical reference manual (252 pages)
Table of Contents
Advertisement
CHAPTER 4: INTERFACES
3.
Remove the tool and attached user-programmable pushbutton label.
4.
Slide the new user-programmable pushbutton label inside the pocket until the text is properly aligned with the
buttons.
4.2.5.2 Standard front panel
After programming LEDs and pushbuttons under Settings > Product Setup > User-Programmable Leds and User-
Programmable Pushbuttons, labels can be created for the front panel.
To create LED and pushbutton labels for a standard front panel:
1.
In the EnerVista software, if the B30 is not already listed in the Offline Window area, add it by right-clicking it and
selecting the Add Device to Offline Window option.
2.
Click the File > Front Panel Report menu item and select the device.
3.
In the Front Panel Report window, double-click an LED or pushbutton slot and type a label. If you need to see the
existing front panel remotely, access Actual Values > Front Panel for the online device. If you need to see the In the
figure, note that labelling is being done for the third set of LEDs because the second panel of LEDs was factory-
labelled.
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
FRONT PANEL INTERFACE
4-47
4
Advertisement
Table of Contents
