GE B30 Instruction Manual page 209

B30 Bus Differential System
Chapter 5: Settings
Settings
This chapter outlines front panel and/or software settings. The relay is not taken out of service when saving settings; the
relay is taken out of service when a settings file is written to it.
Settings can be viewed remotely in a web browser by entering the IP address of the relay, accessing the Device
Information Menu option, then the Front-Panel Display Report option.
When indicated that a restart is required for a setting change to take effect, use the Maintenance > Reboot Relay
Command in the software.
Settings file conversion from previous firmware versions is supported. See the Maintenance chapter.
5.1 Settings menu
 SETTINGS
 PRODUCT SETUP

B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
 SECURITY


 DISPLAY

 PROPERTIES
GRAPHICAL FRONT PANEL

 CLEAR RELAY

 RECORDS
 COMMUNICATIONS


 MODBUS USER MAP


 REAL TIME

 CLOCK
 USER-PROGRAMMABLE

 FAULT REPORT
 OSCILLOGRAPHY


See page 5-7
See page 5-25
Access in EnerVista
See page 5-27
See page 5-39
See page 5-40
See page 5-108
See page 5-109
See page 5-114
See page 5-114
5-1