Display Properties - GE B30 Instruction Manual

CHAPTER 5: SETTINGS
Enumeration Description
10 Clear Energy command (not applicable to all UR products)
11 Clear Unauthorized Access command
12 Clear Teleprotection Counters command (not applicable to all UR products)
13 Clear All Relay Records command
14 Role Log in
15 Role Log off
In addition to supporting syslog, a B30 with CyberSentry also saves the security events in two local security files, these
being SECURITY_EVENTS.CSV and SETTING_CHANGES.LOG. Details on these files and how to retrieve them are available in
the EnerVista software under Maintenance > Retrieve File. Depending on the level of criticality/severity, a syslog server or
a reporting tool gathering information from a syslog server can produce reports, charts, and so on. All severity levels are
per RFC 5424.
Table 5-6: CyberSentry system events recorded
Event
FAILED_AUTH, ORIGIN, TIMESTAMP
AUTH_LOCKOUT, ORIGIN, TIMESTAMP Error (3)
FIRMWARE_UPGD, ORIGIN,
TIMESTAMP
FIRMWARE_LOCK, ORIGIN,
TIMESTAMP
SETTING_CHG, ORIGIN, TIMESTAMP
SETTING_LOCK, ORIGIN, TIMESTAMP
LOGIN, ORIGIN, TIMESTAMP
LOGOUT, ORIGIN, TIMESTAMP
CLEAR_OSCILLOGRAPHY
CLEAR_DATA_LOGGER
CLEAR_DEMAND_RECS
CLEAR_ENERGY
RESET_UNAUTH_ACCESS
CLEAR_TELEPROTECTION_CNT
CLEAR_ALL_RECS

5.3.2 Display properties

SETTINGS  PRODUCT SETUP  DISPLAY PROPERTIES
 DISPLAY
 PROPERTIES
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
Severity Description
Warning (4) A failed authentication with origin information (username and IP:MAC
address), a time stamp in UTC time when it occurred
An authentication lockout has occurred because of too many failed
authentication attempts
Warning (4) Indicates that a change of firmware has occurred
Critical (1) An attempt was made to change firmware while the firmware lock was
enabled
Notice (5) Indicates setting change(s)
Critical (1) An attempt was made to change settings while the settings lock was enabled
Warning (4) Indicates when a certain role logged in
Notice (5) Indicates when a certain role logged out or timed out
Notice (5) Clear oscillography command was issued
Notice (5) Clear data logger command was issued
Notice (5) Clear demand records command was issued
Notice (5) Clear energy command was issued
Warning (4) Reset Unauthorized access command was issued
Notice (5) Clear teleprotection counters command was issued
Warning (4) Clear all records command was issued
LANGUAGE:

English
FLASH MESSAGE

TIME: 1.0 s
DEFAULT MESSAGE

TIMEOUT: 300 s
DEFAULT MESSAGE

INTENSITY: 25 %
SCREEN SAVER

FEATURE: Disabled
Range: English; English, French; English, Russian; English,
Chinese; English, German (examples; depends on order code)
Visible when language other than English purchased
Range: 0.5 to 10.0 s in steps of 0.1
Range: 10 to 900 s in steps of 1
Range: 25%, 50%, 75%, 100%
Visible when a VFD is installed
Range: Disabled, Enabled
Visible when an LCD is installed
PRODUCT SETUP
5
5-25