GE B30 Instruction Manual page 166
Bus differential system
Hide thumbs
Also See for B30:
- Instruction manual (626 pages) ,
- Communications manual (532 pages) ,
- Technical reference manual (252 pages)
Table of Contents
Advertisement
FRONT PANEL INTERFACE
Use the tool with the printed side containing the GE part number facing the user.
The label package shipped with every B30 contains the three default labels, the custom label template sheet, and the label
removal tool.
If the default labels are suitable for your application, insert them in the appropriate slots and program the LEDs to match
them. If you require custom labels, use the following procedures to remove the original labels and insert the new ones.
To set up and use the label removal tool:
1.
Bend the tabs at the left end of the tool upwards as shown.
4
Bend the tab at the center of the tool tail as shown.
To remove the LED labels from the B30 front panel and insert the custom labels:
1.
Use the knife to lift the LED label and slide the label tool underneath. Ensure that the bent tabs are pointing away from
4-44
CHAPTER 4: INTERFACES
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
Advertisement
Table of Contents
