Fan-Fold - Printronix T3306 Setup Manual

6. Slide the media forward, until it extends beyond the printer front slot.
7. Slide the adjustable guide so that it is slightly touching the edge of the
media. Do not turn the knurled nut on top of the guide.
8. Lower the printhead, and engage the printhead latch. Rotate the latch
wing one half-turn clockwise, and snap the latch wing down to lock the
printhead into position.
NOTE: It may be necessary to feed several labels before proper alignment

Fan-Fold

To install fan-folded media, follow the instructions included with the fan fold
adapter kit.
Front Slot
Rewind
Tear Bar
Bracket
Adjustable Media
Guide
Setting Up the Printer
of the media occurs.
Figure 2–6. Raising the Printhead
Upper Media Guide
Media Hub
Figure 2–7. Routing the Media
Printhead
Latch Wing
Bouncer
2–9