Optional Peel And Present - Printronix T3306 Setup Manual

Optional Peel and Present

Perform the following steps to load media for peel and present operation.
1. Pull the peel roller bracket away from the peel and present mechanism
using the two release tabs as shown in
2. Following Steps 1 through 4 under the Roll-Feed Media Lodging section
above.
3. Thread the media over the top of the fixed bracket and under the peel
roller of the roller bracket as shown in Figure 2–11.
Setting Up the Printer
Figure 2–11. Peel and Present Mechanism
Figure 2–10.
2–13