Serial Interface; Host Protocol - Printronix T3306 Setup Manual

Serial Interface

Host Protocol

Values:
XON means transmit on and XOFF means transmit off. In XON/XOFF protocol,
the printer sends ASCII code DC1 (Device Code 1, hex 11, XON) to the host
system when it is ready to receive more data (i.e., the printer is on line and the
data buffer is empty). The printer sends ASCII code DC3 (Device Code 3, hex
13, XOFF) when it is not ready to receive data (i.e., the buffer is full or the printer
is off line).
Host Interface
Host
Protocol
None *
XON/XOFF
Configuring the Printer
NONE or XON/XOFF. This must be set to match your host
computer. The factory default is NONE.
Parallel Parallel
Baud Rate
300
600
1200
2400
4800
9600 *
19200
DTR
Parity
Function
None * Enable *
Even Disable
Odd
Figure 3–13. Host Serial Interface Menu
Stop Bits
Data Bits
8 bits * 1 bit *
7 bits
2 bits
6 bits
5 bits
Press to view options.
Press to select an option.
Press to exit the configuration
menu.
= Factory Default
3–37