Debug Commands - Printronix P5000LJ User Manual

list test
List the status of output tests on the I/O ports.
list time
List the current time on the NIC.
list user
List the current user definitions (e.g., user names and types).
list var
List all pre-defined variables including any newly created ones. Any of
these defined variables can be referenced in a string by placing a
before the variable name (e.g.,

Debug Commands

The debug set of commands help troubleshoot problems that may occur on
the NIC. Some of the output may be cryptic, but it helps when troubleshooting.
debug eeprom
List ROM contents.
debug io
List statistics from the I/O port module.
debug ip
List IP stack statistics.
debug lpd
List statistics from the lpd daemon.
debug lpq
List statistics from the queue module.
debug mem
List statistics from the NIC memory module.
debug nest fserver
View the Novell file server(s) the NIC has acknowledged and connected
to.
debug nest ipx
Determine whether a board has been bound to the NIC under Novell and
that the network number is correct for your network.
debug nest logs
View miscellaneous Novell log messages.
debug nest odi
Determine what frame type is bonded to which board number under
Novell.
debug nest pserver
View the Novell PSERVER log messages including queues attached to.
debug nest rprinter
View the Novell PSERVER and RPRINTER log messages and
destinations used on the NIC.
Debug Commands
set model m1 trailer $FF
$
).
255